Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w

 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
NEW  Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
 Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
Charnwood B225 9" Woodworking Bandsaw 3.5" Cutting Depth - 300w
  • Item Code: 227226
  • MPN: B225
  • Shipping Weight: 20000g
  • Brand: Charnwood
  • Availability: In Stock (Direct Delivery)

£189.00inc. VAT

Add to Basket:

A compact bench top woodworking bandsaw with a 3.5" (90mm) cutting depth, ideal for the hobby woodworker and DIY enthusiast.

  • 3.5" (90mm) Cutting Depth Capacity
  • 9" (228mm) Cutting Width (Throat)
  • Supplied with High Quality British Made Blade
  • Aluminium Work Table - Tilts To 45 Degrees
  • Quick Action Lock On Rip Fence
  • Crosscutting Mitre Guide Included
  • 6 Bearing Blade Guide System
  • Quick Release Blade Tension Lever
  • Quiet Induction Motor
  • Primarily Used For Woodworking

An entry level bandsaw that comes as a complete package. Straight cuts are made against the rip fence, which is set to the cutting width with a quick action locking lever. For crosscuts, the mitre guide slides in the table slot to support the work at 90 degrees or at any angle up to 60 degrees each way. The aluminium table tilts to 45 degrees for bevel cuts, with a geared adjuster for setting the angle precisely.

Light enough to lift onto the workbench by its carrying handle when needed, and compact enough to store away when not in use.

Several features usually only found on larger bandsaws are included. Three guide bearings above the table and three below control the blade and keep it cutting straight. The blade guard is raised and lowered on a rack & pinion by turning a dial, and locks in position. A quick release lever takes the tension off the blade, making blade changes quicker. A toothed drive belt transfers the full power of the motor, and a safety lock stops the motor starting while the doors are open.

A dust extractor is always recommended when using a bandsaw. The dust collection port is 53mm OD / 48mm ID.

Supplied with 1/4" x 6tpi premium blade, carrying handle, rip fence, mitre fence, push stick, NVR on/off switch, 1.9m power cable and UK 3 pin plug.

This Bandsaw is fitted with a High Quality, British manufactured blade. It is made from high carbon steel, with precision ground teeth hardened to 62HRC, so it cuts fast and lasts a long time. The blade supplied cuts both hard and soft woods, and can also cut non-ferrous metals, plastic and acrylic. Other materials can be cut with a suitable blade fitted.

Specification

Maximum cutting depth90mm (3.5")
Throat width228mm (9")
Max. cutting width with rip fence100mm (4")
Table size300mm x 300mm
Table height from bench333mm
Table tilt90-45 degrees
Mitre guide adjustment60 degrees each way
Mitre guide slot width16mm
Blade speed635m/min
Motor (induction)300w (0.4hp), 240v, 50hz
Blade length1575mm (62")
Blade widths6-10mm (1/4" - 3/8")
Dust extraction outlet53mm OD / 48mm ID
Assembled dimensions (WxDxH)480mm x 400mm x 760mm
Shipping dimensions820mm x 440mm x 340mm
Weight20kg
Assembly time required20 minutes
RatingHobby
Product guarantee5 Years

Includes a 5 year manufacturers guarantee.


Downloads & Documents



  • Direct Delivery - Delivered direct from the UK distributor. Usually delivered within 2 - 3 working days. See our delivery information for full details.


  • Product Video


    Privacy Policy  | Terms & Conditions
    Copyright © 2026 Ockenden Timber
     Card Logos