Thread Adapter Exert M33 x 3.5 to 1" x 8

Headstock thread adapter.

To fit onto a lathe with M33 x 3.5mm headstock thread.

Suitable to mount a Scroll Chuck or Faceplate with a 1? x 8tpi thread.

This thread adapter has 2 locking screws for securing the adapter onto the lathe. Centre located 7mm from the end.

Includes 10mm diameter blind hole for tightening or removing using a suitable knock out bar.

Specification

If you are not sure about the thread size you need, please download the How To guide: Measuring A Lathe Headstock Thread Size