|
Robert
Sorby
1 1/4" Stebcentre 2MT
Robert Sorby's 1 1/4" Stebcentre
2MT is a lathe drive centre with several unique features. It
uses razor sharp serrated teeth to grip the work piece, without
the need for pre-marking the wood with the drive prior to
putting it into the lathe.
The greatest benefit the
Stebcentre has over any other drive available on the market is
the spring-loaded centre point. Pressure can be applied so the
wood can be driven with only the tip of the teeth biting, so
that the turner can practice taking cuts with a skew for example
with the knowledge that if a dig-in occurs the wood will stop
turning without any danger. When more confidence is achieved for
the more advanced turner the tailstock can be wound in so that
the teeth give an extremely positive drive.
|
Click To Enlarge
|
Item Code:
RS032
Weight (inc
packaging): 230g
£36.50
|
|
Robert
Sorby
7/8" Revolving Stebcentre 1MT
Robert Sorby's
7/8" Revolving Stebcentre 1MT is a revolving live centre
with the head of a Stebcentre. This allows for basic off-centre
work to be achieved, such as cabriolet candlesticks as well as
multi-sided boxes and even small multi-sided bowls when used in conjunction
with an original Stebcentre or the new Steb Drive.
|
Click To Enlarge
|
Item Code:
RS034
Weight (inc
packaging): 295g
£36.50
|
|
Robert
Sorby
7/8" Revolving Stebcentre 2MT
Robert Sorby's
7/8" Revolving Stebcentre 2MT is a revolving live centre
with the head of a Stebcentre. This allows for basic off-centre
work to be achieved, such as cabriolet candlesticks as well as
multi-sided boxes and even small multi-sided bowls when used in conjunction
with an original Stebcentre or the new Steb Drive.
|
Click To Enlarge
|
Item Code:
RS035
Weight (inc
packaging): 360g
£36.50
|
