|
Robert
Sorby 7/8"
Stebcentre 1MT
Robert Sorby's 7/8" Stebcentre 1MT
is a lathe drive centre with several unique features. It uses
razor sharp serrated teeth to grip the work piece, without the
need for pre-marking the wood with the drive prior to putting it
into the lathe.
The greatest benefit the
Stebcentre has over any other drive available on the market is
the spring-loaded centre point. Pressure can be applied so the
wood can be driven with only the tip of the teeth biting, so
that the turner can practice taking cuts with a skew for example
with the knowledge that if a dig-in occurs the wood will stop
turning without any danger. When more confidence is achieved for
the more advanced turner the tailstock can be wound in so that
the teeth give an extremely positive drive.
|
Click To Enlarge
|
Item Code:
RS028
Weight (inc
packaging): 105g
£31.40
|
|
Robert
Sorby 1 1/4"
Stebcentre 1MT
Robert Sorby's 1 1/4" Stebcentre
1MT is a lathe drive centre with several unique features. It
uses razor sharp serrated teeth to grip the work piece, without
the need for pre-marking the wood with the drive prior to
putting it into the lathe.
The greatest benefit the
Stebcentre has over any other drive available on the market is
the spring-loaded centre point. Pressure can be applied so the
wood can be driven with only the tip of the teeth biting, so
that the turner can practice taking cuts with a skew for example
with the knowledge that if a dig-in occurs the wood will stop
turning without any danger. When more confidence is achieved for
the more advanced turner the tailstock can be wound in so that
the teeth give an extremely positive drive.
|
Click To Enlarge
|
Item Code:
RS029
Weight (inc
packaging): 165g
£36.50
|
|
Robert
Sorby 1/2"
Stebcentre 2MT
Robert Sorby's 1/2" Stebcentre 2MT
is a lathe drive centre with several unique features. It uses
razor sharp serrated teeth to grip the work piece, without the
need for pre-marking the wood with the drive prior to putting it
into the lathe.
The greatest benefit the
Stebcentre has over any other drive available on the market is
the spring-loaded centre point. Pressure can be applied so the
wood can be driven with only the tip of the teeth biting, so
that the turner can practice taking cuts with a skew for example
with the knowledge that if a dig-in occurs the wood will stop
turning without any danger. When more confidence is achieved for
the more advanced turner the tailstock can be wound in so that
the teeth give an extremely positive drive.
|
Click To Enlarge
|
Item Code:
RS030
Weight (inc
packaging): 150g
£31.40
|
