Robert Sorby's Chuck Insert 3/4" x 16 (A) is designed for use with the Patriot Woodturning Chuck. The insert fits into the back of the chuck and onto your lathe headstock spindle. The lathe headstock spindle varies in size depending on what type of lathe you have. Please check your lathe manual or contact the lathe manufacturer to see what size insert or exert you require.

Click To Enlarge

Item Code: RS002

Weight (inc packaging): 210g

£18.70

Robert Sorby's Chuck Insert 20mm x 2 (B) is designed for use with the Patriot Woodturning Chuck. The insert fits into the back of the chuck and onto your lathe headstock spindle. The lathe headstock spindle varies in size depending on what type of lathe you have. Please check your lathe manual or contact the lathe manufacturer to see what size insert or exert you require.

Click To Enlarge

Item Code: RS081

Weight (inc packaging): 205g

£18.70

Robert Sorby's Chuck Insert 20mm x 1.5 (C) is designed for use with the Patriot Woodturning Chuck. The insert fits into the back of the chuck and onto your lathe headstock spindle. The lathe headstock spindle varies in size depending on what type of lathe you have. Please check your lathe manual or contact the lathe manufacturer to see what size insert or exert you require.

Click To Enlarge

Item Code: RS082

Weight (inc packaging): 200g

£18.70

Robert Sorby's Chuck Insert 1" x 10 (E) is designed for use with the Patriot Woodturning Chuck. The insert fits into the back of the chuck and onto your lathe headstock spindle. The lathe headstock spindle varies in size depending on what type of lathe you have. Please check your lathe manual or contact the lathe manufacturer to see what size insert or exert you require.

Click To Enlarge

Item Code: RS003

Weight (inc packaging): 155g

£18.70