Charnwood 1420V Heavy Duty Bench Lathe

  • Item Code: 227080
  • Shipping Weight: 57000g
  • Brand: Charnwood

£630.84  £599.30
Save: 5% off

Add to basket:

A heavy duty bench lathe developed from the best selling Charnwood midi lathe.

  • Electronic Variable Speed Control
  • Digital Speed Read Out
  • Reverse Direction
  • Powerful & Quiet 750w (1hp) Motor
  • High Quality Drive and Tail Centres
  • Cam Action Tool Rest Banjo
  • Steel Tool Rest Bar
  • Built In 24 Position Indexing
  • Hollow head and tail stock

With full cast iron construction this bench lathe is 40% heavier and more stable than the average bench lathe. 

Using a large 1hp motor allows the electronics to achieve a lowest speed of only 250rpm, with enough torque to be useful. The actual spindle speed is shown on a clear digital display.

The tool rest and tailstock both slide smoothly along the bed and are securely locked with a large cam action lever.

The tool rest itself is a round steel bar with optional lengths and shapes available, courtesy of Robert Sorby.

Supplied with drive centre, tail centre, 100mm diameter faceplate, knock out bar, adjustable rubber feet, cable and plug.



Max. spindle length (without centres) 500mm (20")
Max. spindle length (with centres fitted) 430mm (17")
Distance over bed (Max. bowl diameter) 350mm (14")
Distance over tool rest (Max. spindle diameter) 250mm (10")

Tool rest length

150mm (6")

Tool rest stem diameter


Motor (DC carbon brush)

750w (1hp), 240v
Speed range Low 250 - 1400rpm
  Medium 400 - 2650rpm
  High 600 - 4300rpm 
Spindle thread size M33 x 3.5
Spindle tapers MT2
No. of indexing positions 24 (every 15 degrees)
Hollow headstock diameter 10mm
Hollow tailstock diameter 8mm 
Dimensions (WxDxH) 950 x 370 x 500mm
Weight 57kg


Delivered direct from the UK distributor. Usually delivered within 1 - 2 working days.
Privacy Policy  |  Terms & Conditions
Copyright © 2019 Ockenden Timber. All Rights Reserved.
Card Logos