Jet 3520B Heavy Duty Woodturning Lathe

  • Item Code: 202246
  • Shipping Weight: 326000g
  • Brand: Jet
Always Free Shipping

£2,845.00  £2,299.96
Save: 19% off

 Out of stock 

• Heavy cast iron construction (326kg)
• Precision ground bedways
• Speed control via an inverter allows infinite speed adjustment within the machine's range
• Digital spindle revolution indicator
• Spindle lock, makes removing screw on face plates or chucks easier
• Index lock, offers 36 index stops (10°) on the spindle
• Supplied with comparator centres for convenient copy actions
• Useful storage compartment within tailstock

The Jet 3520B lathe is equipped with precision ground bedways and the headstock and tailstock are 13mm thick cast iron with positive cam action locking devices. The heavy duty cast iron headstock is designed to travel up and down the entire length of the bed of the lathe, which allows the turning of very large diameter work at the tailstock end of the lathe. The safety spindle lock makes it easy to remove faceplates and chucks and built in indexing, offers 36 positions (10°) on the spindle. The 2-step, 10 groove Poly-V belt transmits full power from the motor to the spindle at all speeds while providing extra long belt life and ultra smooth running. A forward and reverse switch is a useful feature, especially when sanding timbers with interlocking grain and the ergonomic handles allow easy lifting of the motor for fast speed range changes. Two ratios are available enabling high torque at low rpm and with electronic speed control via an inverter; you can fine tune the speed of the lathe to suit the work in hand by the turn of a knob. The magnetic remote ON/OFF switch can be positioned anywhere along the lathe bed and comparator centres for copy work are a very useful feature. The 460mm bed extension is available as an optional extra and can be attached in two positions, the lower position giving a massive 490mm(19.1/4") centre height above the extension. If you want to buy a great lathe that will not need upgrading at a later date, then this lathe is a sound investment.

Specification  
Distance Between Centres 800mm
Max Diameter over Bed 500mm
Model 3520B
Nett Weight 326kg
Overall L x W x H 1,473 x 685 x 1,370mm
Power Input 1,500W
Speed 50-1,200, 125-3,200rpm
Spindle Taper 2MT
Spindle Thread M33 x 3.5mm
Taper Tailstock 2MT

Privacy Policy  |  Terms & Conditions
Copyright © 2017 Ockenden Timber. All Rights Reserved.
Card Logos